Planning & Buying

New Home Punch List: What Should Your Builder Do Before Closing?

Bill Reiman
Nov 20, 2026 · 6 min read

Before handing you the keys, your builder should set a closing date that leaves enough time, walk the whole house and make a punch list, mark and fix every imperfection, finish inspections and the certificate of occupancy early, clean the house more than once, double-check the list, and then walk through the home with you. Bill Reiman, owner of R.K. Reiman Construction, builds custom luxury homes on Marco Island and in Naples, Florida. He calls this last stretch the most important part of delivering a home, and the step where rushing costs you the most.

Bill recorded this solo episode of The Real Build podcast in 2023 while his team was closing on two homes. Here is how R.K. Reiman Construction handles punch outs, and what homeowners should expect from any custom builder.

What is a punch out on a new home?

A punch out is the final round of checks and fixes before closing. The builder walks the house room by room and marks every imperfection so the right trade can fix it. At R.K. Reiman Construction, that means painters, trim carpenters, cabinet installers, tile setters, countertop installers, electricians and low-voltage crews, often all in the house at once.

The team marks each item with blue painter’s tape so it stands out. Bill and his brother do the punch outs themselves, with help from the superintendent. They split up at opposite ends of the house and meet in the middle. Even the smallest flaws get taped, and followers of Bill’s Instagram stories often joke that it would give them anxiety.

Subcontractors know what to expect. One cabinet installer recently asked Bill to go easy with the tape. Bill took it as a compliment.

How should the closing date be set?

Pick a date that works for everyone, including the builder. Before setting it, the R.K. Reiman team reviews where the house stands, what’s left and which trades still need to come back. Then they agree on a time frame with the client.

Bill doesn’t guarantee a closing date until the end is close, especially with today’s delivery delays. He’s learned that closing too early means people still working, cleaners tracking dirt in and a messy final walkthrough. Homeowners, he says, need to give the builder time if they want a superior product.

A real example: on one home, stair treads were still on order before a scheduled closing. Bill was honest with the client and suggested a one-week extension. That gave time for the treads, the touch-ups that follow and a final cleaning. She agreed, and the closing could be just the client and the builder in a clean, finished house.

Should homeowners make their own punch list?

Yes. The builder must walk the house and make a full written list of everything that still needs to be done or isn’t right, inside and out. Bill also recommends that clients do their own walk once the house is clean, write down what they see, and compare notes with the builder.

A list matters because the final walkthrough is busy. You’re learning how the house works and can easily miss things. Bill’s balance for homeowners: don’t call about items the builder simply hasn’t gotten to yet, but do speak up if something keeps getting missed as closing gets close. A good builder appreciates that communication.

What should be checked during a punch out?

Everything. Bill’s list of what gets inspected and taped includes:

  • Inside finishes: trim, walls, tile, cabinets, countertops, caulking, closets and ceilings
  • Walls: R.K. Reiman does a lot of level five smooth finish, which shows every bump and paint drip, so each one gets sanded and touched up
  • Outside: exterior walls, the roof, railings and whether they’re caulked and sealed, outdoor tile and ceilings, and outdoor cabinetry and countertops
  • Pavers: no chips, and stone pavers set tight with nothing moving
  • Appliances: level, tight and with no gaps
  • Plumbing: every sink runs hot water, and traps have no leaks
  • Equipment: air conditioning, generators and pool pumps all running properly

Bill admits it slows things down a little. On a luxury custom home, he believes over-delivering on details should be the standard, not the exception.

When should final inspections be done?

About a week before closing. You need all inspections finished and a certificate of occupancy (CO) to close. R.K. Reiman has learned from experience that scheduling inspections too late can push a closing, especially in a busy market. Finishing early frees the last week for punch-out work. No keys are handed over and no furniture moves in until the CO is issued.

How many times should a new home be cleaned before closing?

At least twice, and sometimes three times on large homes. The first cleaning happens before the blue tape goes up. Cleaners remove construction dust, wipe baseboards and cabinets, clean windows, peel off stickers and pull up the floor protection. A clean house shows flaws you’d miss otherwise, like gritty trim where paint was sprayed over dust.

The final cleaning comes right before the keys. By then the home should be spotless, including the tops of cabinets and the grout lines.

What happens at the final walkthrough?

Before meeting the client, Bill and his brother double-check the punch list. They confirm every touch-up, caulk line and grout repair is done, countertops are polished, and appliances look good and sit level.

Then comes the final walkthrough with the homeowners. The team shows them:

  • Where the equipment is and how it runs
  • Where the water shutoffs are and how to control the water heaters
  • How to run the pool heater and the pool automation system
  • A short run-through of the smart home system, with a full class scheduled with the smart home provider
  • That the fire pits, fireplaces and grill all work

It’s a celebration too. The team talks through the long road to get there, and clients become part of the R.K. Reiman family. To see what homeowners take home at closing, read what’s inside your closing book.

Key takeaways

  • Don’t rush the closing date. Missed details usually come from too little time.
  • Both the builder and the homeowner should make a written punch list and compare notes.
  • Mark every imperfection, inside and out, so each trade knows exactly what to fix.
  • Finish inspections and get the CO about a week before closing.
  • Clean before the punch out and again before the keys, then double-check the list.

Episode timestamps

  • 0:07 Intro
  • 1:07 Closing on two homes and the punch-out system
  • 2:12 Blue tape and marking every imperfection
  • 5:08 Setting a closing date that works for everyone
  • 8:11 Walk the house and make a list
  • 10:53 Back to the blue tape
  • 15:43 Finishing inspections before closing
  • 16:41 Checking appliances, plumbing and equipment
  • 17:31 Cleaning
  • 19:00 Double-checking the list
  • 19:39 The final walkthrough

Frequently asked questions

What is a punch list on a new home?

A punch list is a written list of every item that still needs to be finished or fixed before closing. The builder walks the house room by room, inside and out, and marks each imperfection so the right trade can repair it.

Should I make my own punch list before closing?

Yes. Walk the house after it has been cleaned, write down anything you notice, and compare your list with the builder’s before the final walkthrough.

Why do builders use blue tape during a punch out?

Blue painter’s tape stands out, so painters, carpenters and other trades can quickly see each imperfection that needs to be fixed.

When should final inspections happen before closing?

Bill Reiman recommends finishing all inspections about a week before closing so the certificate of occupancy is in hand and the last days can go to punch-out work.

How many times should a new home be cleaned before closing?

At least twice: once before the punch out so flaws are easier to see, and a final cleaning before the keys are handed over. Large homes may need a third.

What happens at the final walkthrough of a new home?

The builder shows you where the equipment and water shutoffs are, how to run systems like the water heaters, pool and smart home, and confirms everything on the punch list has been finished.

Learn more

Thinking about building? We’ll walk you through it before you commit.

Talk to our team

Thinking about building?

Start with a conversation, not a sales pitch.

Start your project